Induction Heaters

Heating bearings can be a time and energy-consuming job, not anymore...
Imagine placing a 210kg bearing on an induction heater, and going for a cup of coffee and when you come back the bearing is heated up and ready to be mounted. SKF makes that possible with its new generation of induction heaters, which all have been designed with efficiency and cost saving in mind. To acheive maximum heating efficiency, the induction coil of the SKF heaters is positioned outside the heater's housing allowing the bearing to be placed around it. This significant innovation results in reducing heating time and power consumption by up to 80%, ultimately saving up to 70% on heating costs. For example, the SKF TIH 210m heats a 210 kg (460 lb) bearingfrom 20 to 110 °C (68 to 230 °F) in just 20 minutes.

TIH 030m

The SKF small induction heater TIH 030m combines high heating capacity with portability. The compact lightweight design makes the TIH 030m portable. Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 40 kg (88 lb). The heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 030m is equipped with a time mode for heating components other than bearings. The heater is supplied standard with three yokes and is available in two executions: 230V/50-60Hz and 100-110V/50-60Hz.

For more details on this heater >Click Here<

Large induction heater TIH 240
Fast and safe heating of large size bearings

The SKF TIH 240 induction heater is designed for the heating of large size bearings up to 700 kg (1,500 lb) and any other large components up to 300 kg (660 lb)
This heater can heat a 445 kg (980 lb) bearing in just 10 minutes. It is designed for easy transportation using a forklift.