Please call our sales team with your enquiry
T. 01709 789 999
F. 01709 789 988
E. info@acorn-ind.co.uk

Induction Heater

Portable Induction Heater TIH 030m

The SKF small Induction Heater TIH 030m combines high heating capacity with portability.

The compact lightweight design of the TIH 030m Induction Heater makes it ideal when portability is needed.

Placing the Induction coil outside the heater's housing allows the heating of bearings weighing up to 40 kg (88 lb). The heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 030m is equipped with a time mode for heating components other than bearings. The heater is supplied standard with three yokes and is available in two executions: 230V/50-60Hz and 100-110V/50-60Hz.

	The TIH 030m Induction Heater:
	Compact lightweight design; just 20,9 kg (46.0 lb) facilitating portability
	2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption
	Capable of heating a 28 kg (61.7 lb) bearing in just 20 minutes
	Temperature mode pre-set at 110 °C (230 °F) to help prevent bearing over-heating
	Automatic demagnetisation
	3 years warranty
	Hire this heater for £140 per day!	Click Here for details on hiring this and other maintenance equipment

More information

Brochure	Instructions for use	SKF Induction Heater Range

SKF m 20 concept
"m 20 " represents the weight (kg) of the heaviest SRB 231 bearing which can be heated from 20 to 110 °C (68 to 230 °F) in 20 minutes. This defines the heater's power output instead of its power consumption.


A	Induction coil outside the heater's housing allows shorter heating time and lower energy consumption
B	Foldable bearing support arms facilitate the heating of larger diameter bearings
C	Magnetic temperature probe helps prevent bearing overheating
D	Easy-to-use control panel and LED display integrated in a remote control
E	Internal storage for all 3 yokes reduces the risk of yoke damage or loss
F	Integrated carrying handle facilitates portability

Technical data

Designation	TIH 030M/230V
	TIH 030M/110V
SKF m20 performance	28 kg (61.7 lb)
Voltage, V/Hz	230V/50-60Hz or 100-110V/50-60Hz
Work piece:
- Maximum weight	40 kg (88 lb)
- Maximum bore diameter	20 - 300 mm (0.8 - 11.8 in)
Temperature control:
- Range	0 - 250 °C (32 - 482 °F)
- Magnetic probe	Yes, K-type
- Accuracy (electronics)	± 2 °C (± 3.6 °F)
Time control:
- Range	0 - 60 minutes
- Accuracy	± 0,01 sec.
Maximum temperature (approx.)	400 °C (750 °F)
Thermometer mode	Yes
Bearing mode	Yes
Power setting	2-step; 50% or 100%
Demagnetisation according to SKF norms (automatic)	Yes (<2 A/cm)
Can heat sealed bearings	Yes
Can heat pre-greased bearings	Yes
Error guiding codes	Yes
Thermal overload protection	Yes
Control panel	Control panel and LED display integrated in remote controle
Operating area (w x h)	100 x 135 mm (3.9 x 5.3 in)
Coil diameter	95 mm (3.7 in)
Dimensions (w x d x h)	450 x 195 x 210 mm (17.7 x 7.6 x 8.2 in)
Total weight, including yokes	20,9 kg (46.0 lb)
Maximum power consumption	2,0 kVA
Standard yokes	45 x 45 x 215 mm (1.7 x 1.7 x 8.4 in), for heating bearings with bore diameter of 65 mm (2.6 in) and larger.
	28 x 28 x 215 mm (1.1 x 1.1 x 8.4 in), for heating bearings with bore diameter of 40 mm (1.6 in) and larger.
	14 x 14 x 215 mm (0.5 x 0.5 x 8.4 in), for heating bearings with bore diameter of 20 mm (0.8 in) and larger
Core cross section	45 x 45 mm (1.7 x 1.7 in)
Bearing support arms	Yes, foldable
Yoke storage	Yes, internal integrated in foldable bearing support arms
Cooling fan	No
Swivel arm	No
Housing material	Steel and glass filled polyamide
Warranty period	3 years

Induction Heater

Portable Induction Heater TIH 030m

The TIH 030m Induction Heater: