Please close this browser window after submitting the form

Series UCT - Take-Up Support

For plain shafts
d 20-25-30-35mm
Series UCT - Take-up Support UnitSeries UCT - Take-up Support UnitSeries UCT - Take-up Support UnitSeries UCT - Take-up Support Unit
Ø
d
mm
code version (PA)
  
safety
cap
code
dimensions (mm)
bearing load
ratings
max. radial
load capacity
on plastic
housings
Weight
(kg)
PA
PP
A
B
C
D
E
F
F1
G
H
L
ØP
R
S
J
Z
T
m
n
U
V
dynamic
C (N)
static
Co (N)
PA (N)
PP (N)
Stainless Steel Bearing (with grub screw)
20 52204T/SS 62204T 50009
97.5
92
50
28.5
5.4
 25 4.5 M6x0.75
62
17
 19 32 76 45
34
35.2
18.2
7.6
44.5
54.5
7300
4900
7800
3200
0.30
25 52205T/SS 62205T 50009
97.5
92
50
34
5.4
 25 4.5 M6x0.75
62
17
 19 32 76 45
34
36.8
19.8
7.6
44.5
54.5
8100
5800
6500
3000
0.35
30 52206T/SS 62206T 50010
118
104
57
40
5.9
 28 4.5 M6x0.75
72
18.5
 22 37 89 56
37
40.7
22.2
9
51.5
61.5
11250
8400
12000
3500
0.45
35 52207T/SS 62207T 50010
118
104
57
46.7
7.4
 28 4.5 M6x0.75
72
18.5
 22 37 89 56
37
43.9
25.4
9.6
51.5
61.5
14700
11400
10000
3600
0.55

TECHNICAL INFORMATION

  • Resistance to corrosion:
    - Polyamide version (PA): good resistance to many corrosive chemicals such as water, oils, greases, petrol, milk, wine, alcoholic beverages.
    - Polypropylene version (PP):good resistance to highly corrosive chemicals such as acids, organic liquids, surfactants, detergents.
  • Load capacity:
    - Polyamide version (PA): high load capacity.
    - Polypropylene version (PP): low capacity.
  • Continuous operating temperature:
    - Polyamide version (PA): from -20°C to +90°C.
    - Polypropylene version (PP):from -20°C to +70°C.
    Both versions maintain good dimensional stability at the maximum indicated temperature.
  • Economical operation:
    Long life, maintenance free.
  • Self-alignment:
    Max. misalignment between shaft and housing: 2.5°.
  • Concept and design to meet all safety requirements.
  • Interchangeability:
    Interchangeable with standard cast iron flanged supports.

COMPONENTS

  1. Housing in plastic material.
  2. Adjustable ball bearing, pre-lubricated, lubricated by means of grease-nipple or a quick coupler.
  3. Ball-type grease-nipple.
  4. Clip-on safety cap (accessory). Open version achievable by pressing in the shaft against
    the internal side of the cap.
  5. Washer for grease-nipple.