1-13 of 13 products
KM 18, SKF, Locknut
Nut, Steel, M 90x2, EAN code: 7316577011169
Brand | SKF |
---|---|
Mfr Part No. | KM 18 |
KM 18, Neutral, Locknut
Nut, Steel, M 90x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 18 |
KM 18 Nyloc, Neutral, Locknut
Nut, Steel, M 90x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 18 Nyloc |
KMK 18, SKF, Lock nut with integral locking screw
Nut, Steel, M 90x2, EAN code: 7316571022550
Brand | SKF |
---|---|
Mfr Part No. | KMK 18 |
KMT 17, SKF, Precision Lock nut
Nut, Steel, M 85x2, EAN code: 7316577655066
Brand | SKF |
---|---|
Mfr Part No. | KMT 17 |
KMFE 18, SKF, Lock nut with integral locking screw
Nut, Steel, M90x2, EAN code: 7316571587806
Brand | SKF |
---|---|
Mfr Part No. | KMFE 18 |
KM 18, FAG, Locknut
Nut, Steel, M90x2, EAN code: 4012801052597
Brand | FAG |
---|---|
Mfr Part No. | KM 18 |
KM 18, NKE, Locknut
Nut, Steel, M 90x2, EAN code: 9008745731815
Brand | NKE |
---|---|
Mfr Part No. | KM 18 |
KM 18, RHP, Locknut
Nut, Steel, M 90x2, EAN code: 00747023116539
Brand | RHP |
---|---|
Mfr Part No. | KM 18 |
KM 18, Timken, Locknut
Nut, Steel, M 90x2, EAN code: 0087796028708
Brand | Timken |
---|---|
Mfr Part No. | KM 18 |
KMT 17, NKE, Precision Lock nut
Nut, Steel, M 85x2, EAN code: 9008745720819
Brand | NKE |
---|---|
Mfr Part No. | KMT 17 |
KMTA 18, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 90x2, EAN code: 7316577655325
Brand | SKF |
---|---|
Mfr Part No. | KMTA 18 |
ZM90, INA, Precision locknut
Precision locknut, Steel, M90X2, EAN code: 4012802138009
Brand | INA |
---|---|
Mfr Part No. | ZM90 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.