1-13 of 13 products
KM 19, SKF, Locknut
Nut, Steel, M 95x2, EAN code: 7316577011176
Brand | SKF |
---|---|
Mfr Part No. | KM 19 |
KMT 18, SKF, Precision Lock nut
Nut, Steel, M 90x2, EAN code: 7316577655073
Brand | SKF |
---|---|
Mfr Part No. | KMT 18 |
KM 19, Neutral, Locknut
Nut, Steel, M 95x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 19 |
KMK 19, SKF, Lock nut with integral locking screw
Nut, Steel, M 95x2, EAN code: 7316571179285
Brand | SKF |
---|---|
Mfr Part No. | KMK 19 |
KM 19 Nyloc, Neutral, Locknut
Nut, Steel, M 95x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 19 Nyloc |
KMFE 19, SKF, Lock nut with integral locking screw
Nut, Steel, M95x2, EAN code: 7316571587813
Brand | SKF |
---|---|
Mfr Part No. | KMFE 19 |
KMT 18, NKE, Precision Lock nut
Nut, Steel, M 90x2, EAN code: 9008745731990
Brand | NKE |
---|---|
Mfr Part No. | KMT 18 |
KMTA 19, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 95x2, EAN code: 7316577655332
Brand | SKF |
---|---|
Mfr Part No. | KMTA 19 |
KM 19, FAG, Locknut
Nut, Steel, M95x2, EAN code: 4012801222914
Brand | FAG |
---|---|
Mfr Part No. | KM 19 |
KM 19, NKE, Locknut
Nut, Steel, M 95x2, EAN code: 9008745731822
Brand | NKE |
---|---|
Mfr Part No. | KM 19 |
KM 19, RHP, Locknut
Nut, Steel, M 95x2, EAN code: 00747023116546
Brand | RHP |
---|---|
Mfr Part No. | KM 19 |
KM 19, Timken, Locknut
Nut, Steel, M 95x2, EAN code: 0087796028715
Brand | Timken |
---|---|
Mfr Part No. | KM 19 |
ZMA75/125, INA, Precision locknuts ZMA, locking pegs, radially arranged, heavy series
Precision locknut, Steel, M75X2, EAN code: 4012802466652
Brand | INA |
---|---|
Mfr Part No. | ZMA75/125 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.