1-14 of 14 products
KM 20, SKF, Locknut
Nut, Steel, M 100x2, EAN code: 7316577011183
Brand | SKF |
---|---|
Mfr Part No. | KM 20 |
KM 20, Neutral, Locknut
Nut, Steel, M 100x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 20 |
KMT 19, SKF, Precision Lock nut
Nut, Steel, M 95x2, EAN code: 7316577291882
Brand | SKF |
---|---|
Mfr Part No. | KMT 19 |
ZM100, INA, Precision locknut
Precision locknut, Steel, M100X2, EAN code: 4012802079289
Brand | INA |
---|---|
Mfr Part No. | ZM100 |
KM 20 Nyloc, Neutral, Locknut
Nut, Steel, M 100x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 20 Nyloc |
KMK 20, SKF, Lock nut with integral locking screw
Nut, Steel, M 100x2, EAN code: 7316570447637
Brand | SKF |
---|---|
Mfr Part No. | KMK 20 |
KMT 19, NKE, Precision Lock nut
Nut, Steel, M 95x2, EAN code: 9008745732003
Brand | NKE |
---|---|
Mfr Part No. | KMT 19 |
KMTA 20, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 100x2, EAN code: 7316577655349
Brand | SKF |
---|---|
Mfr Part No. | KMTA 20 |
AM90, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M90X2, EAN code: 4012802032239
Brand | INA |
---|---|
Mfr Part No. | AM90 |
KM 20, FAG, Locknut
Nut, Steel, M100x2, EAN code: 4012801222938
Brand | FAG |
---|---|
Mfr Part No. | KM 20 |
KM 20, NKE, Locknut
Nut, Steel, M 100x2, EAN code: 9008745731839
Brand | NKE |
---|---|
Mfr Part No. | KM 20 |
KM 20, RHP, Locknut
Nut, Steel, M 100x2, EAN code: 00747023116553
Brand | RHP |
---|---|
Mfr Part No. | KM 20 |
KM 20, Timken, Locknut
Nut, Steel, M 100x2, EAN code: 0087796028722
Brand | Timken |
---|---|
Mfr Part No. | KM 20 |
KMFE 20, SKF, Lock nut with integral locking screw
Nut, Steel, M100x2, EAN code: 7316571587820
Brand | SKF |
---|---|
Mfr Part No. | KMFE 20 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.