1-13 of 13 products
KM 24, SKF, Locknut
Nut, Steel, M 120x2, EAN code: 7316577011220
Brand | SKF |
---|---|
Mfr Part No. | KM 24 |
KMT 24, SKF, Precision Lock nut
Nut, Steel, M 120x2, EAN code: 7316577655103
Brand | SKF |
---|---|
Mfr Part No. | KMT 24 |
KM 24, Neutral, Locknut
Nut, Steel, M 120x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 24 |
KML 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577711700
Brand | SKF |
---|---|
Mfr Part No. | KML 26 |
KML 26, NKE, Locknut
Nut, Steel, M 130x2, EAN code: 9008745233364
Brand | NKE |
---|---|
Mfr Part No. | KML 26 |
KML 26, Timken, Locknut
Nut, Steel, M 130x2, EAN code: 0013992212269
Brand | Timken |
---|---|
Mfr Part No. | KML 26 |
KMT 24, NKE, Precision Lock nut
Nut, Steel, M 120x2, EAN code: 9008745233593
Brand | NKE |
---|---|
Mfr Part No. | KMT 24 |
KMTA 24, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 120x2, EAN code: 7316577655363
Brand | SKF |
---|---|
Mfr Part No. | KMTA 24 |
KM 24, FAG, Locknut
Nut, Steel, M120x2, EAN code: 4012801052702
Brand | FAG |
---|---|
Mfr Part No. | KM 24 |
KM 24, NKE, Locknut
Nut, Steel, M 120x2, EAN code: 9008745233142
Brand | NKE |
---|---|
Mfr Part No. | KM 24 |
KM 24, RHP, Locknut
Nut, Steel, M 120x2, EAN code: 00747023116591
Brand | RHP |
---|---|
Mfr Part No. | KM 24 |
KM 24, Timken, Locknut
Nut, Steel, M 120x2, EAN code: 0087796028746
Brand | Timken |
---|---|
Mfr Part No. | KM 24 |
ZM120, INA, Precision locknut
Precision locknut, Steel, M120X2, EAN code: 4012802437713
Brand | INA |
---|---|
Mfr Part No. | ZM120 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.