1-10 of 10 products
KM 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316577011268
Brand | SKF |
---|---|
Mfr Part No. | KM 28 |
KM 28, Neutral, Locknut
Nut, Steel, M 140x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 28 |
KML 30, SKF, Locknut
Nut, Steel, M 150x2, EAN code: 7316577055668
Brand | SKF |
---|---|
Mfr Part No. | KML 30 |
KM 28, Timken, Locknut
Nut, Steel, M 140x2, EAN code: 0087796028760
Brand | Timken |
---|---|
Mfr Part No. | KM 28 |
KM 28, FAG, Locknut
Nut, Steel, M140x2, EAN code: 4012801222990
Brand | FAG |
---|---|
Mfr Part No. | KM 28 |
KM 28, NKE, Locknut
Nut, Steel, M 140x2, EAN code: 9008745724725
Brand | NKE |
---|---|
Mfr Part No. | KM 28 |
KM 28, RHP, Locknut
Nut, Steel, M 140x2, EAN code: 00747023116638
Brand | RHP |
---|---|
Mfr Part No. | KM 28 |
KML 30, NKE, Locknut
Nut, Steel, M 150x2, EAN code: 9008745233388
Brand | NKE |
---|---|
Mfr Part No. | KML 30 |
KML 30, Timken, Locknut
Nut, Steel, M 150x2, EAN code: 0013992211811
Brand | Timken |
---|---|
Mfr Part No. | KML 30 |
KMTA 28, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 140x3, EAN code: 7316577655387
Brand | SKF |
---|---|
Mfr Part No. | KMTA 28 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.