1-10 of 10 products
KMT 30, SKF, Precision Lock nut
Nut, Steel, M 150x2, EAN code: 7316577655134
Brand | SKF |
---|---|
Mfr Part No. | KMT 30 |
MB 27, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011695
Brand | SKF |
---|---|
Mfr Part No. | MB 27 |
MB 27, Neutral, Locking washer
Tab Washer, Steel
Brand | Neutral |
---|---|
Mfr Part No. | MB 27 |
KMT 30, Neutral, Precision Lock nut
Nut, Steel, M 150x2
Brand | Neutral |
---|---|
Mfr Part No. | KMT 30 |
KMT 30, NKE, Precision Lock nut
Nut, Steel, M 150x2, EAN code: 9008745732058
Brand | NKE |
---|---|
Mfr Part No. | KMT 30 |
KMT 30, Timken, Precision Lock nut
Nut, Steel, M 150x2, EAN code: 0013992156921
Brand | Timken |
---|---|
Mfr Part No. | KMT 30 |
MB 27, FAG, Locking washer
Tab Washer, Steel, EAN code: 4012801224529
Brand | FAG |
---|---|
Mfr Part No. | MB 27 |
MB 27, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745732195
Brand | NKE |
---|---|
Mfr Part No. | MB 27 |
MB 27, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023116096
Brand | RHP |
---|---|
Mfr Part No. | MB 27 |
MB 27, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796213272
Brand | Timken |
---|---|
Mfr Part No. | MB 27 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.