KMT 15, NKE, Precision Lock nut
Nut, Steel, M 75x2, EAN code: 9008745731976
TW113, Timken, Locking washer
Washer, Steel, EAN code: 0053893822082
TW115, Timken, Locking washer
Washer, Steel, EAN code: 0053893821924
TAN128, Timken, Lock nut
Nut, Steel, EAN code: 0053893004075
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
Z 205 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316571353616
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
MB 0, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570189964
MB 14, Neutral, Locking washer
Tab Washer, Steel
MB 2, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757968
MB 20, Neutral, Locking washer
Tab Washer, Steel
MB 22, Neutral, Locking washer
Tab Washer, Steel
MB 25, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011671
MB 29, Neutral, Locking washer
Tab Washer, Steel
MB 33, Neutral, Locking washer
Tab Washer, Steel
MB 4, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796213104
MB 8 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316572309988
KM 25, Neutral, Locknut
Nut, Steel, M 125x2
KM 2 Nyloc, Neutral, Locknut
Nut, Steel, M 15x1
KM 30, Neutral, Locknut
Nut, Steel, M 150x2
KM 3 Nyloc, Neutral, Locknut
Nut, Steel, M 17x1
KM 4, Neutral, Locknut
Nut, Steel, M 20x1
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.