1-9 of 9 products
KM 15, SKF, Locknut
Nut, Steel, M 75x2, EAN code: 7316571770253
Brand | SKF |
---|---|
Mfr Part No. | KM 15 |
KMFE 9, SKF, Lock nut with integral locking screw
Nut, Steel, M45x1.5, EAN code: 7316571585109
Brand | SKF |
---|---|
Mfr Part No. | KMFE 9 |
KM 15, Neutral, Locknut
Nut, Steel, M 75x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 15 |
KM 15 Nyloc, Neutral, Locknut
Nut, Steel, M 75x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 15 Nyloc |
KM 15, Timken, Locknut
Nut, Steel, M 75x2, EAN code: 0087796028609
Brand | Timken |
---|---|
Mfr Part No. | KM 15 |
KMFE 8, SKF, Lock nut with integral locking screw
Nut, Steel, M40x1.5, EAN code: 7316571585093
Brand | SKF |
---|---|
Mfr Part No. | KMFE 8 |
KM 15, FAG, Locknut
Nut, Steel, M75x2, EAN code: 4012801052528
Brand | FAG |
---|---|
Mfr Part No. | KM 15 |
KM 15, NKE, Locknut
Nut, Steel, M 75x2, EAN code: 9008745720765
Brand | NKE |
---|---|
Mfr Part No. | KM 15 |
KM 15, RHP, Locknut
Nut, Steel, M 75x2, EAN code: 00747023116508
Brand | RHP |
---|---|
Mfr Part No. | KM 15 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.