1-11 of 11 products
HM 3056, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 280x4, EAN code: 7316577010728
Brand | SKF |
---|---|
Mfr Part No. | HM 3056 |
HM 56 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 280x4, EAN code: 7316577010667
Brand | SKF |
---|---|
Mfr Part No. | HM 56 T |
HM 3056, FAG, Lock nut with locking clip and screw
Locknut, Steel, Tr280X4, EAN code: 4012801218429
Brand | FAG |
---|---|
Mfr Part No. | HM 3056 |
HM 3056, NKE, Lock nut with locking clip and screw
Locknut, Steel, Tr 280x4, EAN code: 9008745224317
Brand | NKE |
---|---|
Mfr Part No. | HM 3056 |
HM 3056, Timken, Lock nut with locking clip and screw
Locknut, Steel, Tr 280x4, EAN code: 0087796251182
Brand | Timken |
---|---|
Mfr Part No. | HM 3056 |
HM 54 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 270x4, EAN code: 7316577106360
Brand | SKF |
---|---|
Mfr Part No. | HM 54 T |
HM 56 T, NKE, T lock/dismounting nut
Nut, Steel, Tr 280x4, EAN code: 9008745224652
Brand | NKE |
---|---|
Mfr Part No. | HM 56 T |
HM 56 T, Timken, T lock/dismounting nut
Nut, Steel, Tr 280x4, EAN code: 0013992155474
Brand | Timken |
---|---|
Mfr Part No. | HM 56 T |
KMT 48, SKF, Precision Lock nut
Nut, Steel, Tr 240x4, EAN code: 7316570070149
Brand | SKF |
---|---|
Mfr Part No. | KMT 48 |
KMT 52, SKF, Precision Lock nut
Nut, Steel, Tr 260x4, EAN code: 7316570071818
Brand | SKF |
---|---|
Mfr Part No. | KMT 52 |
ZMA75/125, INA, Precision locknuts ZMA, locking pegs, radially arranged, heavy series
Precision locknut, Steel, M75X2, EAN code: 4012802466652
Brand | INA |
---|---|
Mfr Part No. | ZMA75/125 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.