Beam couplings

Ruland Flexible beam couplings are machined from a single piece of aluminium or stainless steel and feature multiple helical cuts. The multiple cut design provides higher torque capabilities and greatly reduced wind-up when compared to commodity type single beam couplings.

1-20 of 223 products

Why choose a Ruland beam coupling?

  • Higher torsional rigidity compared to commodity style single-beam couplings.
  • Unique balanced clamp screw design reduces vibration while the cross cut increases clamping ability.
  • Machined from a single piece of aluminium or stainless steel with multiple spiral cuts for higher torsional stiffness and torque capabilities.
  • Accommodates parallel misalignment, angular misalignment and axial motion.
  • Two sets of cuts around centre member better accommodate parallel misalignment then single beam couplings.
  • Four beam and six beam couplings offered.  Four beam couplings are more flexible with lower bearing loads. Six beam couplings have increased torque capacity and higher torsional stiffness.
  • Aluminium couplings made from type 7075 aluminium for longer life.
  • Stainless steel couplings offered for greater torque capacity.

Filter Results

Filter Results
Filter

Brand

  • Ruland (223)

Stock

  • Just show products in stock (25)

Component

  • Complete (218)

Size

  • 8 (1)
  • 10 (2)
  • 12 (1)
  • 13 (3)
  • 14 (2)
  • 15 (4)
  • 16 (17)
  • 18 (4)
  • 19 (13)
  • 20 (8)
  • 22 (4)
  • 24 (6)
  • 25 (69)
  • 29 (7)
  • 30 (16)
  • 32 (35)
  • 38 (26)

Hub Design

  • Clamping (165)
  • Set Screw (53)

Large Bore (mm)

  • 3 (4)
  • 3.175 (1)
  • 4 (3)
  • 5 (7)
  • 6 (25)
  • 6.35 (3)
  • 7 (1)
  • 7.938 (1)
  • 8 (27)
  • 9 (15)
  • 9.525 (4)
  • 10 (45)
  • 11 (7)
  • 12 (27)
  • 12.7 (3)
  • 13 (1)
  • 14 (15)
  • 15 (5)
  • 16 (5)
  • 18 (1)
  • 19 (4)
  • 20 (2)

Small Bore (mm)

  • 3 (5)
  • 3.175 (1)
  • 4 (7)
  • 5 (9)
  • 6 (37)
  • 6.35 (6)
  • 7 (1)
  • 7.938 (2)
  • 8 (33)
  • 9 (11)
  • 9.525 (6)
  • 10 (41)
  • 11 (6)
  • 12 (23)
  • 12.7 (1)
  • 13 (1)
  • 14 (8)
  • 15 (2)
  • 16 (4)
  • 18 (1)
  • 19 (1)
  • 20 (2)

od (mm)

  • 9.5 (1)
  • 12.7 (3)
  • 15 (4)
  • 15.9 (6)
  • 19.1 (13)
  • 20 (7)
  • 22.2 (4)
  • 25 (25)
  • 25.4 (44)
  • 28.6 (7)
  • 30 (16)
  • 31.8 (35)
  • 38.1 (26)

Length (mm)

  • 14.3 (1)
  • 19.1 (3)
  • 20 (2)
  • 20.3 (3)
  • 22 (4)
  • 22.9 (6)
  • 24 (10)
  • 25.4 (3)
  • 27 (4)
  • 28 (5)
  • 30 (23)
  • 31.8 (28)
  • 38 (8)
  • 38.1 (36)
  • 44.5 (29)
  • 57.2 (26)

Large Bore (inch)

  • 0.01 (1)
  • 0.035 (1)
  • 0.036 (2)
  • 0.037 (1)
  • 0.041 (1)
  • 0.047 (1)
  • 0.048 (1)
  • 0.064 (1)
  • 0.08 (1)
  • 0.094 (1)
  • 0.108 (1)
  • 0.118 (1)
  • 0.13 (1)
  • 0.14 (2)
  • 0.147 (1)
  • 1/4 (2)
  • 0.328 (1)
  • 0.333 (1)
  • 3/8 (2)
  • 1/2 (1)

Small Bore (In)

  • 1/8 (1)
  • 1/4 (7)
  • 5/16 (2)
  • 3/8 (10)
  • 1/2 (1)
  • 5/8 (1)
  • 3/4 (4)

od (In)

  • 1/2 (1)
  • 5/8 (1)
  • 3/4 (1)
  • 1 (5)
  • 1.1/8 (12)
  • 1.1/4 (1)
  • 1.1/2 (6)

Length (inch)

  • 3/4 (1)
  • 0.9 (1)
  • 1.1/4 (2)
  • 1.1/2 (14)
  • 1.3/4 (1)
  • 2.1/4 (6)

Number of Screws

  • 2 ea (179)
  • 4 ea (39)