MB 48, FAG, Locking washer
Tab Washer, Steel, EAN code: 4012801224628
MB 5, FAG, Locking washer
Tab Washer, Steel, EAN code: 4054369880595
MB 52, FAG, Locking washer
Tab Washer, Steel, EAN code: 4012801224642
MB 56, FAG, Locking washer
Tab Washer, Steel, EAN code: 4012801224659
MB 6, FAG, Locking washer
Tab Washer, Steel, EAN code: 4054369880366
MB 7, FAG, Locking washer
Tab Washer, Steel, EAN code: 4054369880175
MB 8, FAG, Locking washer
Tab Washer, Steel, EAN code: 4054369880397
MB 9, FAG, Locking washer
Tab Washer, Steel, EAN code: 4054369880410
MBL 40, FAG, Locking washer
Securing plate, Steel, EAN code: 4012801135962
MS 3044, FAG, Locking clip
Securing plate, Steel, EAN code: 4012801224758
MS 3048, FAG, Locking clip
Securing plate, Steel, EAN code: 4012801224765
MS 3060, FAG, Locking clip
Securing plate, Steel, EAN code: 4012801224789
MS 3064, FAG, Locking clip
Securing plate, Steel, EAN code: 4012801224796
MS 3072, FAG, Locking clip
Securing plate, Steel, EAN code: 4012801315074
MS 3076, FAG, Locking clip
Securing plate, Steel, EAN code: 4012801224802
HM 3044, FAG, Lock nut with locking clip and screw
Locknut, Steel, Tr220X4, EAN code: 4012801218399
HM 3048, FAG, Lock nut with locking clip and screw
Locknut, Steel, Tr240X4, EAN code: 4012801218405
HM 3052, FAG, Lock nut with locking clip and screw
Locknut, Steel, Tr260X4, EAN code: 4012801218412
HM 3056, FAG, Lock nut with locking clip and screw
Locknut, Steel, Tr280X4, EAN code: 4012801218429
HM 3060, FAG, Lock nut with locking clip and screw
Locknut, Steel, Tr300X4, EAN code: 4012801218436
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.