HM 3064, FAG, Lock nut with locking clip and screw
Locknut, Steel, Tr320X5, EAN code: 4012801218443
HM 3072, FAG, Lock nut with locking clip and screw
Locknut, Steel, Tr360X5, EAN code: 4012801309554
HM 3080, FAG, Lock nut with locking clip and screw
Locknut, Steel, Tr400X5, EAN code: 4012801218474
HM 48 T, FAG, T lock/dismounting nut
Nut, Steel, Tr240X4, EAN code: 4012801218580
HM 52 T, FAG, T lock/dismounting nut
Nut, Steel, Tr260X4, EAN code: 4012801218597
HM 56 T, FAG, T lock/dismounting nut
Nut, Steel, Tr280X4, EAN code: 4012801218610
KM 0, FAG, Locknut
Nut, Steel, M10x0, 75, EAN code: 4012801174299
KM 1, FAG, Locknut
Nut, Steel, M12x1, EAN code: 4012801174305
KM 11, FAG, Locknut
Nut, Steel, M55x2, EAN code: 4012801174329
KM 12, FAG, Locknut
Nut, Steel, M60x2, EAN code: 4012801174336
KM 13, FAG, Locknut
Nut, Steel, M65x2, EAN code: 4012801052511
KM 14, FAG, Locknut
Nut, Steel, M70x2, EAN code: 4012801174343
KM 15, FAG, Locknut
Nut, Steel, M75x2, EAN code: 4012801052528
KM 16, FAG, Locknut
Nut, Steel, M80x2, EAN code: 4012801174350
KM 17, FAG, Locknut
Nut, Steel, M85x2, EAN code: 4012801052580
KM 18, FAG, Locknut
Nut, Steel, M90x2, EAN code: 4012801052597
KM 19, FAG, Locknut
Nut, Steel, M95x2, EAN code: 4012801222914
KM 2, FAG, Locknut
Nut, Steel, M15x1, EAN code: 4012801174367
KM 20, FAG, Locknut
Nut, Steel, M100x2, EAN code: 4012801222938
KM 23, FAG, Locknut
Nut, Steel, M115x2, EAN code: 4012801222969
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.