KM 25, FAG, Locknut
Nut, Steel, M125x2, EAN code: 4012801222976
KM 26, FAG, Locknut
Nut, Steel, M130x2, EAN code: 4012801222983
KM 27, FAG, Locknut
Nut, Steel, M135x2, EAN code: 4012801052719
KM 28, FAG, Locknut
Nut, Steel, M140x2, EAN code: 4012801222990
KM 29, FAG, Locknut
Nut, Steel, M145x2, EAN code: 4012801223003
KM 3, FAG, Locknut
Nut, Steel, M17x1, EAN code: 4012801052146
KM 30, FAG, Locknut
Nut, Steel, M150x2, EAN code: 4012801223027
KM 31, FAG, Locknut
Nut, Steel, M155x3, EAN code: 4012801223034
KM 32, FAG, Locknut
Nut, Steel, M160x3, EAN code: 4012801223041
KM 33, FAG, Locknut
Nut, Steel, M165x3, EAN code: 4012801223058
KM 34, FAG, Locknut
Nut, Steel, M170x3, EAN code: 4012801223065
KM 36, FAG, Locknut
Nut, Steel, M180x3, EAN code: 4012801223072
KM 38, FAG, Locknut
Nut, Steel, M190x3, EAN code: 4012801223089
KM 40, FAG, Locknut
Nut, Steel, M200x3, EAN code: 4012801223096
KM 5, FAG, Locknut
Nut, Steel, M25x1, 5, EAN code: 4012801052191
KM 6, FAG, Locknut
Nut, Steel, M30x1, 5, EAN code: 4012801052221
KM 7, FAG, Locknut
Nut, Steel, M35x1, 5, EAN code: 4012801174374
KM 8, FAG, Locknut
Nut, Steel, M40x1, 5, EAN code: 4012801174381
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.