ZM40, INA, Precision locknut
Precision locknut, Steel, M40X1, 5, EAN code: 4012802079364
ZM60, INA, Precision locknut
Precision locknut, Steel, M60X2, EAN code: 4012802439632
ZM20, INA, Precision locknut
Precision locknut, Steel, M20X1, EAN code: 4012802079326
ZM55, INA, Precision locknut
Precision locknut, Steel, M55X2, EAN code: 4012802463156
ZM30, INA, Precision locknut
Precision locknut, Steel, M30X1, 5, EAN code: 4012802079340
ZM35, INA, Precision locknut
Precision locknut, Steel, M35X1, 5, EAN code: 4012802079357
ZM70, INA, Precision locknut
Precision locknut, Steel, M70X2, EAN code: 4012802137972
ZS1329, INA, Central washer
Washer
ZS3151, INA, Central washer
Washer
AM15, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M15X1, EAN code: 4012802032116
AM17, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M17X1, EAN code: 4012802032123
AM20, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M20X1, EAN code: 4012802032130
AM25, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M25X1, 5, EAN code: 4012802032147
AM30, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M30X1, 5, EAN code: 4012802032154
AM35, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M35X1, 5, EAN code: 4012802032161
AM35/58, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M35X1, 5, EAN code: 4012802032178
AM40, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M40X1, 5, EAN code: 4012802032185
AM45, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M45X1, 5, EAN code: 4012802032192
AM50, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M50X1, 5, EAN code: 4012802032208
AM60, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M60X2, EAN code: 4054369426175
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.