KM 18 Nyloc, Neutral, Locknut
Nut, Steel, M 90x2
KM 19 Nyloc, Neutral, Locknut
Nut, Steel, M 95x2
KM 2 Nyloc, Neutral, Locknut
Nut, Steel, M 15x1
KM 23, Neutral, Locknut
Nut, Steel, M 115x2
KM 24, Neutral, Locknut
Nut, Steel, M 120x2
KM 25, Neutral, Locknut
Nut, Steel, M 125x2
KM 3 Nyloc, Neutral, Locknut
Nut, Steel, M 17x1
KM 32, Neutral, Locknut
Nut, Steel, M 160x3
KM 34, Neutral, Locknut
Nut, Steel, M 170x3
KM 36, Neutral, Locknut
Nut, Steel, M 180x3
KMT 14, Neutral, Precision Lock nut
Nut, Steel, M 70x2
MB 8 NP, Neutral, Locking washer
Tab Washer, Nickel plated
MB 11 NP, Neutral, Locking washer
Tab Washer, Nickel plated
MB 13 NP, Neutral, Locking washer
Tab Washer, Nickel plated
MB 21, Neutral, Locking washer
Tab Washer, Steel
MB 26, Neutral, Locking washer
Tab Washer, Steel
MB 28, Neutral, Locking washer
Tab Washer, Steel
KMT 28, Neutral, Precision Lock nut
Nut, Steel, M 140x2
KMT 6, Neutral, Precision Lock nut
Nut, Steel, M 30x1.5
KM 26, Neutral, Locknut
Nut, Steel, M 130x2
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.