AW 01, NSK, Locking washer
Washer, Steel, EAN code: 00029176527609
AN 08, NSK, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 00029176527401
AW 03, NSK, Locking washer
Washer, Steel, EAN code: 00029176527623
AW 12, NSK, Locking washer
Washer, Steel, EAN code: 00029176527722
AW 25, NSK, Locking washer
Washer, Steel, EAN code: 00029176527852
AN 01, NSK, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 00029176527340
AN 03, NSK, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 00029176527364
AN 20, NSK, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 00029176498480
AN 29, NSK, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 00029176527524
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.