KMTA 22, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 110x2, EAN code: 7316577655356
KMTA 6, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 30x1.5, EAN code: 7316577655202
KMF 7, SKF, Lock nut with integral locking screw
Nut, Steel, M 35x1.5
KMFE 10, SKF, Lock nut with integral locking screw
Nut, Steel, M50x1.5, EAN code: 7316571585116
KMFE 15, SKF, Lock nut with integral locking screw
Nut, Steel, M75x2, EAN code: 7316571585352
KMFE 20, SKF, Lock nut with integral locking screw
Nut, Steel, M100x2, EAN code: 7316571587820
W 28, SKF, Locking washer
Washer, Steel, EAN code: 7316576676208
AN 18, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660429
N 06, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280738
MB 25, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011671
KM 32, SKF, Locknut
Nut, Steel, M 160x3, EAN code: 7316577011305
KMT 4, SKF, Precision Lock nut
Nut, Steel, M 20x1, EAN code: 7316577662736
KM 36, SKF, Locknut
Nut, Steel, M 180x3, EAN code: 7316577011336
Z 010 F, SKF, Sealing washers, F design
Washer, Steel
MB 40, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001399
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
KMF 9, SKF, Lock nut with integral locking screw
Nut, Steel, M 40x1.5
KML 30, SKF, Locknut
Nut, Steel, M 150x2, EAN code: 7316577055668
KMT 14, SKF, Precision Lock nut
Nut, Steel, M 70x2, EAN code: 7316577656513
ZW 90X110, SKF, Spacing washer
Washer, Steel
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.