MBL 24, SKF, Locking washer
Securing plate, Steel, EAN code: 7316571090573
HM 3056, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 280x4, EAN code: 7316577010728
HM 44 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 220x4, EAN code: 7316577010629
HM 56 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 280x4, EAN code: 7316577010667
KMT 32, SKF, Precision Lock nut
Nut, Steel, M 160x3, EAN code: 7316577655141
KMTA 11, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 55x1.5, EAN code: 7316577655257
KMTA 12, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 60x1.5, EAN code: 7316577655264
KMTA 13, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 65x1.5, EAN code: 7316577655271
KMTA 16, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 80x2, EAN code: 7316577655301
KMTA 9, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 45x1.5, EAN code: 7316577655233
W 24, SKF, Locking washer
Washer, Steel, EAN code: 7316576676185
Z 006, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571326160
KMT 15, SKF, Precision Lock nut
Nut, Steel, M 75x2, EAN code: 7316577655042
Z 008 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316571351148
Z 206 F, SKF, Sealing washers, F design
Washer, Steel
AN 20, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660443
MB 32, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011732
HM 3044, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 220x4, EAN code: 7316577010698
HM 3064, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 320x5, EAN code: 7316577010735
KM 34, SKF, Locknut
Nut, Steel, M 170x3, EAN code: 7316577011329
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.