KMFE 16, SKF, Lock nut with integral locking screw
Nut, Steel, M80x2, EAN code: 7316571585574
Z 205 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316571353616
MB 8 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316572309988
MS 3052-48, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577058348
MB 0, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570189964
MB 10 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571158815
KMT 20, SKF, Precision Lock nut
Nut, Steel, M 100x2, EAN code: 7316577655080
KM 0, SKF, Locknut
Nut, Steel, M 10x0.75, EAN code: 7316571353432
KML 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577711700
W 16, SKF, Locking washer
Washer, Steel, EAN code: 7316571385600
Z 007, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351131
Z 206, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571501260
ZW 70X80, SKF, Spacing washer
Washer, Steel, EAN code: 7316571351100
MBL 30, SKF, Locking washer
Securing plate, Steel, EAN code: 7316577055644
MBL 32, SKF, Locking washer
Securing plate, Steel, EAN code: 7316577753021
MBL 36, SKF, Locking washer
Securing plate, Steel, EAN code: 7316571033082
MS 3072, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577115027
MB 33, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011749
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.