HM 3072, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 360x5, EAN code: 7316577115010
HM 52 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 260x4, EAN code: 7316577010650
KMTA 10, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 50x1.5, EAN code: 7316577655240
KMTA 15, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 75x1.5, EAN code: 7316577655295
KMTA 18, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 90x2, EAN code: 7316577655325
KMTA 7, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 35x1.5, EAN code: 7316577655219
KM 25, SKF, Locknut
Nut, Steel, M 125x2, EAN code: 7316577011237
KM 31, SKF, Locknut
Nut, Steel, M 155x3, EAN code: 7316577011299
KM 33, SKF, Locknut
Nut, Steel, M 165x3, EAN code: 7316577011312
KMFE 13, SKF, Lock nut with integral locking screw
Nut, Steel, M65x2, EAN code: 7316579008495
KMFE 18, SKF, Lock nut with integral locking screw
Nut, Steel, M90x2, EAN code: 7316571587806
KMFE 22, SKF, Lock nut with integral locking screw
Nut, Steel, M110x2, EAN code: 7316571587844
KMT 13, SKF, Precision Lock nut
Nut, Steel, M 65x2, EAN code: 7316577655035
Z 005, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571318714
MBL 28, SKF, Locking washer
Securing plate, Steel, EAN code: 7316571081526
MS 3044, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011800
MS 3060, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011848
MS 3068-64, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011855
HM 3048, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 240x4, EAN code: 7316577010704
HM 3160, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 300x4, EAN code: 7316577010766
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.