Z 308, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351254
W 20, SKF, Locking washer
Washer, Steel, EAN code: 7316576676154
ZW 17X24, SKF, Spacing washer
Washer, Steel
ZW 45X55, SKF, Spacing washer
Washer, Steel
ZW 50X62, SKF, Spacing washer
Washer, Steel, EAN code: 7316571353531
AN 30, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660504
MB 9 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571155333
HM 3052, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 260x4, EAN code: 7316577010711
HM 3060, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 300x4, EAN code: 7316577114938
HM 3068, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 340x5, EAN code: 7316577114990
HM 48 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 240x4, EAN code: 7316577010643
MS 3080-76, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577115072
MS 3160, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011879
KMT 2, SKF, Precision Lock nut
Nut, Steel, M 15x1, EAN code: 7316577662712
KMT 24, SKF, Precision Lock nut
Nut, Steel, M 120x2, EAN code: 7316577655103
KMT 3, SKF, Precision Lock nut
Nut, Steel, M 17x1, EAN code: 7316577662729
KMTA 14, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 70x1.5, EAN code: 7316577655288
KMTA 20, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 100x2, EAN code: 7316577655349
KMTA 8, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 40x1.5, EAN code: 7316577655226
KMT 0, SKF, Precision Lock nut
Nut, Steel, M 10x0.75, EAN code: 7316577662699
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.