KMT 11, SKF, Precision Lock nut
Nut, Steel, M 55x2, EAN code: 7316577655028
KMFE 9, SKF, Lock nut with integral locking screw
Nut, Steel, M45x1.5, EAN code: 7316571585109
MB 17, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770215
MB 24, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571498904
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
MB 26, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011688
KM 18, SKF, Locknut
Nut, Steel, M 90x2, EAN code: 7316577011169
KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
N 11, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385686
W 07, SKF, Locking washer
Washer, Steel, EAN code: 7316571385525
W 12, SKF, Locking washer
Washer, Steel, EAN code: 7316571385570
MB 20, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011633
MB 14, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571773728
MB 18, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011619
MB 7, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757456
KM 24, SKF, Locknut
Nut, Steel, M 120x2, EAN code: 7316577011220
KMF 1, SKF, Lock nut with integral locking screw
Nut, Steel, M 12x1, EAN code: 7316580969044
KMFE 5, SKF, Lock nut with integral locking screw
Nut, Steel, M25x1.5, EAN code: 7316571584775
KMFE 8, SKF, Lock nut with integral locking screw
Nut, Steel, M40x1.5, EAN code: 7316571585093
W 10, SKF, Locking washer
Washer, Steel, EAN code: 7316571385556
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.