KMT 12, SKF, Precision Lock nut
Nut, Steel, M 60x2, EAN code: 7316577294982
MB 28, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011701
W 06, SKF, Locking washer
Washer, Steel, EAN code: 7316571396620
W 15, SKF, Locking washer
Washer, Steel, EAN code: 7316571385655
W 26, SKF, Locking washer
Washer, Steel, EAN code: 7316576676192
KMFE 11, SKF, Lock nut with integral locking screw
Nut, Steel, M55x2, EAN code: 7316571585192
KMFE 7, SKF, Lock nut with integral locking screw
Nut, Steel, M35x1.5, EAN code: 7316571584799
MB 31, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577105653
N 05, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571278735
N 09, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385501
N 12, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280721
W 14, SKF, Locking washer
Washer, Steel, EAN code: 7316571385594
W 17, SKF, Locking washer
Washer, Steel, EAN code: 7316571385617
KMT 8, SKF, Precision Lock nut
Nut, Steel, M 40x1.5, EAN code: 7316577655011
KMFE 4, SKF, Lock nut with integral locking screw
Nut, Steel, M20x1, EAN code: 7316571584683
W 09, SKF, Locking washer
Washer, Steel, EAN code: 7316571385549
MB 30, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011725
MB 44, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011787
KM 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316577011268
KM 38, SKF, Locknut
Nut, Steel, M 190x3, EAN code: 7316577011343
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.