W 13, SKF, Locking washer
Washer, Steel, EAN code: 7316571385587
ZW 85X100, SKF, Spacing washer
Washer, Steel
KMT 28, SKF, Precision Lock nut
Nut, Steel, M 140x2, EAN code: 7316577655127
KMFE 12, SKF, Lock nut with integral locking screw
Nut, Steel, M60x2, EAN code: 7316571585307
MB 29, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011718
MB 38, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011770
KM 1, SKF, Locknut
Nut, Steel, M 12x1, EAN code: 7316571353449
KMFE 14, SKF, Lock nut with integral locking screw
Nut, Steel, M70x2, EAN code: 7316571585345
MB 36, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011763
MB 21, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011640
MB 3, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570545975
N 13, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385488
KMT 9, SKF, Precision Lock nut
Nut, Steel, M 45x1.5, EAN code: 7316577294951
KM 23, SKF, Locknut
Nut, Steel, M 115x2, EAN code: 7316577011213
KMF 2, SKF, Lock nut with integral locking screw
Nut, Steel, M 15x1
KMT 16, SKF, Precision Lock nut
Nut, Steel, M 80x2, EAN code: 7316577655059
W 05, SKF, Locking washer
Washer, Steel, EAN code: 7316571385518
KMF 10, SKF, Lock nut with integral locking screw
Nut, Steel, M 50x1.5
W 22, SKF, Locking washer
Washer, Steel, EAN code: 7316576676178
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.