TW119, Timken, Locking washer
Washer, Steel, EAN code: 0053893822112
MB 14, Timken, Locking washer
Tab Washer, Steel, EAN code: 0013992166968
MB 15, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028159
MB 20, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028258
MB 22, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028272
MB 5, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028357
MB 7, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028388
MB 8, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028395
KM 1, Timken, Locknut
Nut, Steel, M 12x1, EAN code: 0087796212732
MB 0, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796213050
MB 1, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796213067
MB 11, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028128
MB 12, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028135
MB 13, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028142
MB 16, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028166
MB 17, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028173
MB 18, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028180
MB 19, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028197
MB 2, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796213074
MB 21, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796213227
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.