KMK 2, SKF, Lock nut with integral locking screw
Nut, Steel, M 15x1, EAN code: 7316571483528
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 24, SKF, Precision Lock nut
Nut, Steel, M 120x2, EAN code: 7316577655103
This item is not currently available from our stocks.
Despatch date information is on request.
MB 26, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011688
KM 16, SKF, Locknut
Nut, Steel, M 80x2, EAN code: 7316571770239
AN 16, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353487
This item is not currently available from our stocks.
Despatch date information is on request.
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
N 05, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571278735
KM 1, SKF, Locknut
Nut, Steel, M 12x1, EAN code: 7316571353449
KMT 7, SKF, Precision Lock nut
Nut, Steel, M 35x1.5, EAN code: 7316577292605
KMT 8, SKF, Precision Lock nut
Nut, Steel, M 40x1.5, EAN code: 7316577655011
W 26, SKF, Locking washer
Washer, Steel, EAN code: 7316576676192
AN 15, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353623
AN 26, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660481
KM 30, SKF, Locknut
Nut, Steel, M 150x2, EAN code: 7316577011282
MB 16, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770222
N 08, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280714
N 13, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385488
KM 11 Nyloc, Neutral, Locknut
Nut, Steel, M 55x2
KM 15 Nyloc, Neutral, Locknut
Nut, Steel, M 75x2
MB 14, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571773728
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.