TAN18, Timken, Lock nut
Nut, Steel, EAN code: 0053893001357
This item is not currently available from our stocks.
Despatch date information is on request.
TW111, Timken, Locking washer
Washer, Steel, EAN code: 0053893821917
TW112, Timken, Locking washer
Washer, Steel, EAN code: 0053893822075
KM 12 Nyloc, Neutral, Locknut
Nut, Steel, M 60x2
KM 20, Neutral, Locknut
Nut, Steel, M 100x2
KM 5 Nyloc, Neutral, Locknut
Nut, Steel, M 25x1.5
KMK 9, SKF, Lock nut with integral locking screw
Nut, Steel, M 45x1.5, EAN code: 7316571106991
KMT 10, SKF, Precision Lock nut
Nut, Steel, M 50x1.5, EAN code: 7316577314062
KM 6 Nyloc, Neutral, Locknut
Nut, Steel, M 30x1.5
This item is not currently available from our stocks.
Despatch date information is on request.
KMFE 22, SKF, Lock nut with integral locking screw
Nut, Steel, M110x2, EAN code: 7316571587844
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 40, SKF, Precision Lock nut
Nut, Steel, M 200x3, EAN code: 7316577655189
KM 1, SKF, Locknut
Nut, Steel, M 12x1, EAN code: 7316571353449
KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
KM 22 Nyloc, Neutral, Locknut
Nut, Steel, M 110x2
KMFE 5, SKF, Lock nut with integral locking screw
Nut, Steel, M25x1.5, EAN code: 7316571584775
KMT 20, SKF, Precision Lock nut
Nut, Steel, M 100x2, EAN code: 7316577655080
KMT 5, SKF, Precision Lock nut
Nut, Steel, M 25x1.5, EAN code: 7316577662743
KMT 7, SKF, Precision Lock nut
Nut, Steel, M 35x1.5, EAN code: 7316577292605
AN 15, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353623
MB 12, Neutral, Locking washer
Tab Washer, Steel
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.