MB 15, Neutral, Locking washer
Tab Washer, Steel
Z 307, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351230
HM 44 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 220x4, EAN code: 7316577010629
KMK 14, SKF, Lock nut with integral locking screw
Nut, Steel, M 70x2, EAN code: 7316570280166
KMT 30, SKF, Precision Lock nut
Nut, Steel, M 150x2, EAN code: 7316577655134
This item is not currently available from our stocks.
Despatch date information is on request.
MB 27, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011695
TW065, Timken, Locking washer
Washer, Steel, EAN code: 0053893200989
TW124, Timken, Locking washer
Washer, Steel, EAN code: 0053893815794
AN 18, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660429
AN 22, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660467
KM 19, Neutral, Locknut
Nut, Steel, M 95x2
KM 32, SKF, Locknut
Nut, Steel, M 160x3, EAN code: 7316577011305
MB 30, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011725
Z 206 F, SKF, Sealing washers, F design
Washer, Steel
KMTA 8, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 40x1.5, EAN code: 7316577655226
KM 17, Neutral, Locknut
Nut, Steel, M 85x2
KM 25, Neutral, Locknut
Nut, Steel, M 125x2
KM 34, Neutral, Locknut
Nut, Steel, M 170x3
KM 4, Neutral, Locknut
Nut, Steel, M 20x1
KMFE 11, SKF, Lock nut with integral locking screw
Nut, Steel, M55x2, EAN code: 7316571585192
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.