AN 17, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353494
KM 9, Neutral, Locknut
Nut, Steel, M 45x1.5
MB 19, Neutral, Locking washer
Tab Washer, Steel
MB 29, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011718
ZW 85X100, SKF, Spacing washer
Washer, Steel
KMK 20, SKF, Lock nut with integral locking screw
Nut, Steel, M 100x2, EAN code: 7316570447637
TW122, Timken, Locking washer
Washer, Steel, EAN code: 0053893822136
TAN24, Timken, Lock nut
Nut, Steel, EAN code: 0053893001531
W 26, SKF, Locking washer
Washer, Steel, EAN code: 7316576676192
HM 52 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 260x4, EAN code: 7316577010650
KM 13 Nyloc, Neutral, Locknut
Nut, Steel, M 65x2
KM 23, SKF, Locknut
Nut, Steel, M 115x2, EAN code: 7316577011213
KM 30, Neutral, Locknut
Nut, Steel, M 150x2
KM 36, SKF, Locknut
Nut, Steel, M 180x3, EAN code: 7316577011336
W 18, SKF, Locking washer
Washer, Steel, EAN code: 7316576676130
This item is not currently available from our stocks.
Despatch date information is on request.
HM 3044, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 220x4, EAN code: 7316577010698
KM 25, SKF, Locknut
Nut, Steel, M 125x2, EAN code: 7316577011237
KM 29, Neutral, Locknut
Nut, Steel, M 145x2
This item is not currently available from our stocks.
Despatch date information is on request.
KM 33, SKF, Locknut
Nut, Steel, M 165x3, EAN code: 7316577011312
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.