MB 12, Neutral, Locking washer
Tab Washer, Steel
MB 15, Neutral, Locking washer
Tab Washer, Steel
KM 1, SKF, Locknut
Nut, Steel, M 12x1, EAN code: 7316571353449
KM 4, Neutral, Locknut
Nut, Steel, M 20x1
KMFE 5, SKF, Lock nut with integral locking screw
Nut, Steel, M25x1.5, EAN code: 7316571584775
KMT 20, SKF, Precision Lock nut
Nut, Steel, M 100x2, EAN code: 7316577655080
KMT 5, SKF, Precision Lock nut
Nut, Steel, M 25x1.5, EAN code: 7316577662743
KMT 7, SKF, Precision Lock nut
Nut, Steel, M 35x1.5, EAN code: 7316577292605
Z 307, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351230
MB 27, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011695
KMTA 8, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 40x1.5, EAN code: 7316577655226
TW065, Timken, Locking washer
Washer, Steel, EAN code: 0053893200989
TW124, Timken, Locking washer
Washer, Steel, EAN code: 0053893815794
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
KM 32, SKF, Locknut
Nut, Steel, M 160x3, EAN code: 7316577011305
Z 206 F, SKF, Sealing washers, F design
Washer, Steel
MB 0, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570189964
MB 19, Neutral, Locking washer
Tab Washer, Steel
MB 20, Neutral, Locking washer
Tab Washer, Steel
MB 21, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011640
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.