W 11, SKF, Locking washer
Washer, Steel, EAN code: 7316571385563
KMT 24, SKF, Precision Lock nut
Nut, Steel, M 120x2, EAN code: 7316577655103
This item is not currently available from our stocks.
Despatch date information is on request.
MBL 36, SKF, Locking washer
Securing plate, Steel, EAN code: 7316571033082
AN 30, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660504
KM 11, Neutral, Locknut
Nut, Steel, M 55x2
KM 14, Neutral, Locknut
Nut, Steel, M 70x2
KM 14 Nyloc, Neutral, Locknut
Nut, Steel, M 70x2
KM 18, Neutral, Locknut
Nut, Steel, M 90x2
KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
KM 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577011244
KMK 4, SKF, Lock nut with integral locking screw
Nut, Steel, M 20x1, EAN code: 7316571483542
N 13, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385488
MB 18, Neutral, Locking washer
Tab Washer, Steel
Z 009, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316570221565
Z 307, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351230
KMT 17, SKF, Precision Lock nut
Nut, Steel, M 85x2, EAN code: 7316577655066
MB 32, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011732
TW111, Timken, Locking washer
Washer, Steel, EAN code: 0053893821917
TW112, Timken, Locking washer
Washer, Steel, EAN code: 0053893822075
AN 22, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660467
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.