KM 5, Neutral, Locknut
Nut, Steel, M 25x1.5
MB 3, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570545975
KMK 18, SKF, Lock nut with integral locking screw
Nut, Steel, M 90x2, EAN code: 7316571022550
KM 21, SKF, Locknut
Nut, Steel, M 105x2, EAN code: 7316577011190
KMT 11, SKF, Precision Lock nut
Nut, Steel, M 55x2, EAN code: 7316577655028
KMT 6, SKF, Precision Lock nut
Nut, Steel, M 30x1.5, EAN code: 7316577291851
N 14, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385471
MB 10, Neutral, Locking washer
Tab Washer, Steel
W 16, SKF, Locking washer
Washer, Steel, EAN code: 7316571385600
ZW 85X100, SKF, Spacing washer
Washer, Steel
KMT 28, SKF, Precision Lock nut
Nut, Steel, M 140x2, EAN code: 7316577655127
This item is not currently available from our stocks.
Despatch date information is on request.
AN 15, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353623
KM 4 Nyloc, Neutral, Locknut
Nut, Steel, M 20x1
KMK 16, SKF, Lock nut with integral locking screw
Nut, Steel, M 80x2, EAN code: 7316570831580
KMT 14, SKF, Precision Lock nut
Nut, Steel, M 70x2, EAN code: 7316577656513
HM 3072, NKE, Lock nut with locking clip and screw
Locknut, Steel, Tr 360x5, EAN code: 9008745224355
This item is not currently available from our stocks.
Despatch date information is on request.
KM 0, SKF, Locknut
Nut, Steel, M 10x0.75, EAN code: 7316571353432
KM 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316577011268
KM 6, Neutral, Locknut
Nut, Steel, M 30x1.5
KMT 8, SKF, Precision Lock nut
Nut, Steel, M 40x1.5, EAN code: 7316577655011
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.