KM 1, Timken, Locknut
Nut, Steel, M 12x1, EAN code: 0087796212732
KM 22, FAG, Locknut
Nut, Steel, M110x2, EAN code: 4012801222952
This item is not currently available from our stocks.
Despatch date information is on request.
KM 24, Timken, Locknut
Nut, Steel, M 120x2, EAN code: 0087796028746
KM 27, FAG, Locknut
Nut, Steel, M135x2, EAN code: 4012801052719
This item is not currently available from our stocks.
Despatch date information is on request.
KM 33, FAG, Locknut
Nut, Steel, M165x3, EAN code: 4012801223058
This item is not currently available from our stocks.
Despatch date information is on request.
KM 34, FAG, Locknut
Nut, Steel, M170x3, EAN code: 4012801223065
This item is not currently available from our stocks.
Despatch date information is on request.
KM 34, Timken, Locknut
Nut, Steel, M 170x3, EAN code: 0087796028791
KM 36, NKE, Locknut
Nut, Steel, M 180x3, EAN code: 9008745233265
This item is not currently available from our stocks.
Despatch date information is on request.
KM 7, NKE, Locknut
Nut, Steel, M 35x1.5, EAN code: 9008745731785
KM 8, FAG, Locknut
Nut, Steel, M40x1, 5, EAN code: 4012801174381
This item is not currently available from our stocks.
Despatch date information is on request.
KM 8, NKE, Locknut
Nut, Steel, M 40x1.5, EAN code: 9008745724732
KM 8, Timken, Locknut
Nut, Steel, M 40x1.5, EAN code: 0087796028838
KML 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316571048918
This item is not currently available from our stocks.
Despatch date information is on request.
KML 28, NKE, Locknut
Nut, Steel, M 140x2, EAN code: 9008745233371
MBL 36, SKF, Locking washer
Securing plate, Steel, EAN code: 7316571033082
MS 3056, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011831
This item is not currently available from our stocks.
Despatch date information is on request.
This item is not currently available from our stocks.
Despatch date information is on request.
TAN128, Timken, Lock nut
Nut, Steel, EAN code: 0053893004075
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.