This item is not currently available from our stocks.
Despatch date information is on request.
MB 11, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023115761
This item is not currently available from our stocks.
Despatch date information is on request.
This item is not currently available from our stocks.
Despatch date information is on request.
W 22, Timken, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
TW107, Timken, Locking washer
Washer, Steel, EAN code: 0053893822044
TW108, Timken, Locking washer
Washer, Steel, EAN code: 0053893822051
TW120, Timken, Locking washer
Washer, Steel, EAN code: 0053893822129
TW130, Timken, Locking washer
Washer, Steel, EAN code: 0053893822167
Z 204 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316570415025
This item is not currently available from our stocks.
Despatch date information is on request.
KM 0 Nyloc, Neutral, Locknut
Nut, Steel, M 10x0.75
KM 16 Nyloc, Neutral, Locknut
Nut, Steel, M 80x2
KM 18 Nyloc, Neutral, Locknut
Nut, Steel, M 90x2
KM 19 Nyloc, Neutral, Locknut
Nut, Steel, M 95x2
KM 23, Neutral, Locknut
Nut, Steel, M 115x2
KM 33, Neutral, Locknut
Nut, Steel, M 165x3
KM 5, Timken, Locknut
Nut, Steel, M 25x1.5, EAN code: 0087796028807
KM 9, Timken, Locknut
Nut, Steel, M 45x1.5, EAN code: 0087796028845
KMK 13, SKF, Lock nut with integral locking screw
Nut, Steel, M 65x2, EAN code: 7316570928730
KMT 0, Neutral, Precision Lock nut
Nut, Steel, M 10x0.75
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.