N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
KM 23, SKF, Locknut
Nut, Steel, M 115x2, EAN code: 7316577011213
KM 36, SKF, Locknut
Nut, Steel, M 180x3, EAN code: 7316577011336
W 14, SKF, Locking washer
Washer, Steel, EAN code: 7316571385594
MB 14, Neutral, Locking washer
Tab Washer, Steel
MB 15, Neutral, Locking washer
Tab Washer, Steel
MB 20, Neutral, Locking washer
Tab Washer, Steel
MB 25, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011671
MB 44, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011787
MB 7, Neutral, Locking washer
Tab Washer, Steel
N 05, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571278735
KM 34, Neutral, Locknut
Nut, Steel, M 170x3
KMFE 4, SKF, Lock nut with integral locking screw
Nut, Steel, M20x1, EAN code: 7316571584683
KMK 14, SKF, Lock nut with integral locking screw
Nut, Steel, M 70x2, EAN code: 7316570280166
KMK 2, SKF, Lock nut with integral locking screw
Nut, Steel, M 15x1, EAN code: 7316571483528
AN 20, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660443
HM 3044, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 220x4, EAN code: 7316577010698
MB 32, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011732
KMFE 10, SKF, Lock nut with integral locking screw
Nut, Steel, M50x1.5, EAN code: 7316571585116
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 12, SKF, Precision Lock nut
Nut, Steel, M 60x2, EAN code: 7316577294982
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.