W 06, SKF, Locking washer
Washer, Steel, EAN code: 7316571396620
This item is not currently available from our stocks.
Despatch date information is on request.
KM 12, Neutral, Locknut
Nut, Steel, M 60x2
This item is not currently available from our stocks.
Despatch date information is on request.
TW103, Timken, Locking washer
Washer, Steel, EAN code: 0053893822013
This item is not currently available from our stocks.
Despatch date information is on request.
W 05, Timken, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
AN 30, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660504
W 11, SKF, Locking washer
Washer, Steel, EAN code: 7316571385563
MB 26, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011688
KM 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316577011268
KMK 4, SKF, Lock nut with integral locking screw
Nut, Steel, M 20x1, EAN code: 7316571483542
KM 40, SKF, Locknut
Nut, Steel, M 200x3, EAN code: 7316577011350
KM 6 Nyloc, Neutral, Locknut
Nut, Steel, M 30x1.5
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 18, SKF, Precision Lock nut
Nut, Steel, M 90x2, EAN code: 7316577655073
TW115, Timken, Locking washer
Washer, Steel, EAN code: 0053893821924
MB 10, Neutral, Locking washer
Tab Washer, Steel
KM 18, Neutral, Locknut
Nut, Steel, M 90x2
KM 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577011244
KMT 20, SKF, Precision Lock nut
Nut, Steel, M 100x2, EAN code: 7316577655080
KMT 8, SKF, Precision Lock nut
Nut, Steel, M 40x1.5, EAN code: 7316577655011
W 05, SKF, Locking washer
Washer, Steel, EAN code: 7316571385518
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.