MB 33, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011749
TW114, Timken, Locking washer
Washer, Steel, EAN code: 0053893822099
TW116, Timken, Locking washer
Washer, Steel, EAN code: 0053893816753
AN 17, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353494
KMT 20, Neutral, Precision Lock nut
Nut, Steel, M 100x2
MB 10 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571158815
MB 8, Neutral, Locking washer
Tab Washer, Steel
HM 3052, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 260x4, EAN code: 7316577010711
KM 31, SKF, Locknut
Nut, Steel, M 155x3, EAN code: 7316577011299
KMK 20, SKF, Lock nut with integral locking screw
Nut, Steel, M 100x2, EAN code: 7316570447637
MB 5, Neutral, Locking washer
Tab Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
MB 8 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316572309988
This item is not currently available from our stocks.
Despatch date information is on request.
TAN140, Timken, Lock nut
Nut, Steel, EAN code: 0053893004563
KM 1 Nyloc, Neutral, Locknut
Nut, Steel, M 12x1
KM 20 Nyloc, Neutral, Locknut
Nut, Steel, M 100x2
KM 24, Neutral, Locknut
Nut, Steel, M 120x2
KM 28, Neutral, Locknut
Nut, Steel, M 140x2
KM 32, SKF, Locknut
Nut, Steel, M 160x3, EAN code: 7316577011305
KM 34, Neutral, Locknut
Nut, Steel, M 170x3
KMK 10, SKF, Lock nut with integral locking screw
Nut, Steel, M 50x1.5, EAN code: 7316570965087
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.