MB 5, Neutral, Locking washer
Tab Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
KM 33, SKF, Locknut
Nut, Steel, M 165x3, EAN code: 7316577011312
KMT 40, SKF, Precision Lock nut
Nut, Steel, M 200x3, EAN code: 7316577655189
TW065, Timken, Locking washer
Washer, Steel, EAN code: 0053893200989
TW111, Timken, Locking washer
Washer, Steel, EAN code: 0053893821917
This item is not currently available from our stocks.
Despatch date information is on request.
TW122, Timken, Locking washer
Washer, Steel, EAN code: 0053893822136
This item is not currently available from our stocks.
Despatch date information is on request.
MB 15, Neutral, Locking washer
Tab Washer, Steel
MB 16, Neutral, Locking washer
Tab Washer, Steel
MB 19, Neutral, Locking washer
Tab Washer, Steel
MB 25, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011671
MB 7, Neutral, Locking washer
Tab Washer, Steel
KMFE 9, SKF, Lock nut with integral locking screw
Nut, Steel, M45x1.5, EAN code: 7316571585109
KMT 16, SKF, Precision Lock nut
Nut, Steel, M 80x2, EAN code: 7316577655059
W 14, SKF, Locking washer
Washer, Steel, EAN code: 7316571385594
W 16, SKF, Locking washer
Washer, Steel, EAN code: 7316571385600
Z 007 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316570687309
MB 32, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011732
KM 8, Neutral, Locknut
Nut, Steel, M 40x1.5
This item is not currently available from our stocks.
Despatch date information is on request.
KMFE 10, SKF, Lock nut with integral locking screw
Nut, Steel, M50x1.5, EAN code: 7316571585116
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 12, SKF, Precision Lock nut
Nut, Steel, M 60x2, EAN code: 7316577294982
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.