KMT 17, SKF, Precision Lock nut
Nut, Steel, M 85x2, EAN code: 7316577655066
KMT 28, SKF, Precision Lock nut
Nut, Steel, M 140x2, EAN code: 7316577655127
KMT 34, SKF, Precision Lock nut
Nut, Steel, M 170x3, EAN code: 7316577655158
TAN24, Timken, Lock nut
Nut, Steel, EAN code: 0053893001531
This item is not currently available from our stocks.
Despatch date information is on request.
AN 24, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660474
MB 44, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011787
KM 12 Nyloc, Neutral, Locknut
Nut, Steel, M 60x2
KM 36, SKF, Locknut
Nut, Steel, M 180x3, EAN code: 7316577011336
KM 25, SKF, Locknut
Nut, Steel, M 125x2, EAN code: 7316577011237
TW140, Timken, Locking washer
Washer, Steel, EAN code: 0053893821344
TAN16, Timken, Lock nut
Nut, Steel, EAN code: 0053893001272
This item is not currently available from our stocks.
Despatch date information is on request.
MB 1, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570872781
MB 17, Neutral, Locking washer
Tab Washer, Steel
MB 21, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011640
MB 38, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011770
N 05, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571278735
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
KM 16, Neutral, Locknut
Nut, Steel, M 80x2
KM 1, Neutral, Locknut
Nut, Steel, M 12x1
KM 25, Neutral, Locknut
Nut, Steel, M 125x2
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.