KMT 15, SKF, Precision Lock nut
Nut, Steel, M 75x2, EAN code: 7316577655042
MB 1, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570872781
MB 17, Neutral, Locking washer
Tab Washer, Steel
MB 21, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011640
MB 38, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011770
N 05, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571278735
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
KMK 15, SKF, Lock nut with integral locking screw
Nut, Steel, M 75x2, EAN code: 7316570506051
KMT 13, SKF, Precision Lock nut
Nut, Steel, M 65x2, EAN code: 7316577655035
This item is not currently available from our stocks.
Despatch date information is on request.
KMTA 22, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 110x2, EAN code: 7316577655356
KMTA 7, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 35x1.5, EAN code: 7316577655219
This item is not currently available from our stocks.
Despatch date information is on request.
MB 23, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011664
MB 31, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577105653
MB 33, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011749
TW114, Timken, Locking washer
Washer, Steel, EAN code: 0053893822099
TW116, Timken, Locking washer
Washer, Steel, EAN code: 0053893816753
KM 32, SKF, Locknut
Nut, Steel, M 160x3, EAN code: 7316577011305
KMK 10, SKF, Lock nut with integral locking screw
Nut, Steel, M 50x1.5, EAN code: 7316570965087
KMT 20, Neutral, Precision Lock nut
Nut, Steel, M 100x2
AN 17, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353494
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.