W 30, SKF, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
W 40, SKF, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
TAN17, Timken, Lock nut
Nut, Steel, EAN code: 0053893001319
This item is not currently available from our stocks.
Despatch date information is on request.
TW128, Timken, Locking washer
Washer, Steel, EAN code: 0053893822150
TN07, Timken, Lock nut
Nut, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
TN12, Timken, Lock nut
Nut, Steel, EAN code: 0053893000978
Z 010, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571353562
MB 22, Neutral, Locking washer
Tab Washer, Steel
MBL 32, SKF, Locking washer
Securing plate, Steel, EAN code: 7316577753021
KMFE 15, SKF, Lock nut with integral locking screw
Nut, Steel, M75x2, EAN code: 7316571585352
KMK 12, SKF, Lock nut with integral locking screw
Nut, Steel, M 60x2, EAN code: 7316570379334
Z 008 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316571351148
Z 210, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316577300782
HM 3052, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 260x4, EAN code: 7316577010711
This item is not currently available from our stocks.
Despatch date information is on request.
HM 48 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 240x4, EAN code: 7316577010643
KMK 0, SKF, Lock nut with integral locking screw
Nut, Steel, M 10x0.75, EAN code: 7316571483504
KML 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316571048918
KMT 32, SKF, Precision Lock nut
Nut, Steel, M 160x3, EAN code: 7316577655141
KMTA 12, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 60x1.5, EAN code: 7316577655264
W 22, SKF, Locking washer
Washer, Steel, EAN code: 7316576676178
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.