HM 52 T, FAG, T lock/dismounting nut
Nut, Steel, Tr260X4, EAN code: 4012801218597
This item is not currently available from our stocks.
Despatch date information is on request.
KM 10, FAG, Locknut
Nut, Steel, M50x1, 5, EAN code: 4012801174312
This item is not currently available from our stocks.
Despatch date information is on request.
KM 12, Timken, Locknut
Nut, Steel, M 60x2, EAN code: 0087796028562
KM 16, FAG, Locknut
Nut, Steel, M80x2, EAN code: 4012801174350
This item is not currently available from our stocks.
Despatch date information is on request.
KMFE 12, SKF, Lock nut with integral locking screw
Nut, Steel, M60x2, EAN code: 7316571585307
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 17, NKE, Precision Lock nut
Nut, Steel, M 85x2, EAN code: 9008745720819
KMT 9, NKE, Precision Lock nut
Nut, Steel, M 45x1.5, EAN code: 9008745233746
MB 11, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023115761
This item is not currently available from our stocks.
Despatch date information is on request.
This item is not currently available from our stocks.
Despatch date information is on request.
W 22, Timken, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
AN 29, NSK, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 00029176527524
AW07, NTN, Locking washer
Washer, Steel
HM 3072, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 360x5, EAN code: 7316577115010
KM 0, Neutral, Locknut
Nut, Steel, M 10x0.75
KM 0 Nyloc, Neutral, Locknut
Nut, Steel, M 10x0.75
KM 13, Timken, Locknut
Nut, Steel, M 65x2, EAN code: 0087796028586
KM 15 Nyloc, Neutral, Locknut
Nut, Steel, M 75x2
KM 16 Nyloc, Neutral, Locknut
Nut, Steel, M 80x2
KM 18 Nyloc, Neutral, Locknut
Nut, Steel, M 90x2
KM 19 Nyloc, Neutral, Locknut
Nut, Steel, M 95x2
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.