KMT 22, Neutral, Precision Lock nut
Nut, Steel, M 110x2
KMT 3, SKF, Precision Lock nut
Nut, Steel, M 17x1, EAN code: 7316577662729
KMT 4, Neutral, Precision Lock nut
Nut, Steel, M 20x1
MB 1, Neutral, Locking washer
Tab Washer, Steel
MB 16, Neutral, Locking washer
Tab Washer, Steel
MB 30, Neutral, Locking washer
Tab Washer, Steel
MB 34, Neutral, Locking washer
Tab Washer, Steel
MB 48, Neutral, Locking washer
Tab Washer, Steel
MB 5, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028357
MB 6 NP, Neutral, Locking washer
Tab Washer, Nickel plated
MB 8, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028395
MB 9, Neutral, Locking washer
Tab Washer, Steel
Z 005, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571318714
Z 007 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316570687309
Z 013, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571353579
Z 205 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316571353616
Z 208 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316577300744
Z 211, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351186
Z 306, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316570756326
ZW 25X32, SKF, Spacing washer
Washer, Steel, EAN code: 7316571385624
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.