KMK 0, SKF, Lock nut with integral locking screw
Nut, Steel, M 10x0.75, EAN code: 7316571483504
KMT 32, SKF, Precision Lock nut
Nut, Steel, M 160x3, EAN code: 7316577655141
KMTA 12, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 60x1.5, EAN code: 7316577655264
This item is not currently available from our stocks.
Despatch date information is on request.
MS 3160, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011879
This item is not currently available from our stocks.
Despatch date information is on request.
TAN140, Timken, Lock nut
Nut, Steel, EAN code: 0053893004563
TW110, Timken, Locking washer
Washer, Steel, EAN code: 0053893821320
This item is not currently available from our stocks.
Despatch date information is on request.
W 22, SKF, Locking washer
Washer, Steel, EAN code: 7316576676178
Z 005, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571318714
Z 007 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316570687309
Z 013, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571353579
Z 205 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316571353616
Z 211, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351186
Z 306, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316570756326
ZW 25X32, SKF, Spacing washer
Washer, Steel, EAN code: 7316571385624
ZW 75X85, SKF, Spacing washer
Washer, Steel, EAN code: 7316571351117
ZW 90X110, SKF, Spacing washer
Washer, Steel
MB 0, Neutral, Locking washer
Tab Washer, Steel
MB 1, Neutral, Locking washer
Tab Washer, Steel
MB 16, Neutral, Locking washer
Tab Washer, Steel
MB 2, Neutral, Locking washer
Tab Washer, Steel
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.