KMTA 8, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 40x1.5, EAN code: 7316577655226
TN07, Timken, Lock nut
Nut, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
TAN21, Timken, Lock nut
Nut, Steel, EAN code: 0053893001470
MB 0, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570189964
N 13, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385488
KM 1, Neutral, Locknut
Nut, Steel, M 12x1
KM 9, Neutral, Locknut
Nut, Steel, M 45x1.5
HM 3048, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 240x4, EAN code: 7316577010704
KMT 12, SKF, Precision Lock nut
Nut, Steel, M 60x2, EAN code: 7316577294982
KMT 13, SKF, Precision Lock nut
Nut, Steel, M 65x2, EAN code: 7316577655035
W 30, SKF, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
MB 5, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028357
MB 8 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316572309988
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
KMT 16, SKF, Precision Lock nut
Nut, Steel, M 80x2, EAN code: 7316577655059
KMT 5, SKF, Precision Lock nut
Nut, Steel, M 25x1.5, EAN code: 7316577662743
KMTA 11, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 55x1.5, EAN code: 7316577655257
KM 15 Nyloc, Neutral, Locknut
Nut, Steel, M 75x2
KM 3, SKF, Locknut
Nut, Steel, M 17x1, EAN code: 7316571249797
KM 34, Neutral, Locknut
Nut, Steel, M 170x3
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.