KM 6 Nyloc, Neutral, Locknut
Nut, Steel, M 30x1.5
KMFE 14, SKF, Lock nut with integral locking screw
Nut, Steel, M70x2, EAN code: 7316571585345
W 28, SKF, Locking washer
Washer, Steel, EAN code: 7316576676208
Z 206 F, SKF, Sealing washers, F design
Washer, Steel
AN 30, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660504
This item is not currently available from our stocks.
Despatch date information is on request.
KMTA 16, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 80x2, EAN code: 7316577655301
This item is not currently available from our stocks.
Despatch date information is on request.
KM 36, SKF, Locknut
Nut, Steel, M 180x3, EAN code: 7316577011336
TW112, Timken, Locking washer
Washer, Steel, EAN code: 0053893822075
W 14, SKF, Locking washer
Washer, Steel, EAN code: 7316571385594
AN 24, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660474
MB 10, Neutral, Locking washer
Tab Washer, Steel
MB 15, Neutral, Locking washer
Tab Washer, Steel
MB 25, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011671
MB 6, Neutral, Locking washer
Tab Washer, Steel
KM 20, Neutral, Locknut
Nut, Steel, M 100x2
KM 24, Neutral, Locknut
Nut, Steel, M 120x2
KM 2, Neutral, Locknut
Nut, Steel, M 15x1
MB 40, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001399
KMFE 12, SKF, Lock nut with integral locking screw
Nut, Steel, M60x2, EAN code: 7316571585307
This item is not currently available from our stocks.
Despatch date information is on request.
KMK 0, SKF, Lock nut with integral locking screw
Nut, Steel, M 10x0.75, EAN code: 7316571483504
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.