KMT 34, SKF, Precision Lock nut
Nut, Steel, M 170x3, EAN code: 7316577655158
MB 32, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011732
TAN24, Timken, Lock nut
Nut, Steel, EAN code: 0053893001531
Z 006, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571326160
AN 24, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660474
KM 12 Nyloc, Neutral, Locknut
Nut, Steel, M 60x2
W 16, SKF, Locking washer
Washer, Steel, EAN code: 7316571385600
KM 25, SKF, Locknut
Nut, Steel, M 125x2, EAN code: 7316577011237
KM 33, SKF, Locknut
Nut, Steel, M 165x3, EAN code: 7316577011312
TAN16, Timken, Lock nut
Nut, Steel, EAN code: 0053893001272
This item is not currently available from our stocks.
Despatch date information is on request.
TW140, Timken, Locking washer
Washer, Steel, EAN code: 0053893821344
W 26, SKF, Locking washer
Washer, Steel, EAN code: 7316576676192
HM 52 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 260x4, EAN code: 7316577010650
KM 1, Neutral, Locknut
Nut, Steel, M 12x1
KM 2, Neutral, Locknut
Nut, Steel, M 15x1
KM 2 Nyloc, Neutral, Locknut
Nut, Steel, M 15x1
KM 25, Neutral, Locknut
Nut, Steel, M 125x2
KM 3 Nyloc, Neutral, Locknut
Nut, Steel, M 17x1
KM 30, Neutral, Locknut
Nut, Steel, M 150x2
KMFE 14, SKF, Lock nut with integral locking screw
Nut, Steel, M70x2, EAN code: 7316571585345
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.